1. |
Do
not run the grinder empty for more than a minute. |
2. |
Do
not put your hand into the drum while the appliance
is in operation. |
3. |
Do
not attempt to unlock the arm while the appliance is
in operation. |
| 4. |
Do
not attempt to lift the appliance while it is in operation. |
5. |
Do
not attempt to repair the appliance yourself.In case
of any fault contact our nearest Dealer / Service point. |
6. |
Do
not use any other attachments except those provided by
the manufacturer. |
7. |
We
do not recommend any voltage converters to use in 230v,
50hz model grinders in USA and Canada. |
|
8.
Do not attempt to lift the Roller stone assembly using wiper.
|
..... |
9.
Do not pour water on the appliance for cleaning. It is recommended
that a damp sponge be used for this purpose.
|
10.
Do not insert any sharp object into the slits provided.This
may damage the parts inside.
|
|
11.
Do not keep the drum up side down after washing. |
12.
Do not chip of the stones to make the surface rough.
|
|
13.
Do not lubricate any plastic parts with oil / grease.
|
| |
|
| ..Do's
For Perfect + Only |
|
|
| |
1. |
Use
only dry cloth to clean the Timer membrane |
|
| |
|
| ..Dont's
For Perfect + Only |
|
|
| |
1. |
Do
not change the timer setting while grinder is in operation.
In case necessary stop the grinder and reset time |
2. |
Avoid
spilling water on the membrane pad |
3. |
Don't
apply more pressure on switches |
| 4. |
Avoid
operating the timer with wet hand and finger with Nail |
|
