| |
...
Sequence of Operation |
| |
|
|
|
| |
|
|
| Clean
drum assembly thoroughly |
|
Place
drum on pulley coupler.
Gently rotate till drum fixes itself. |
| |
|
|
|
|
|
| |
|
|
| Place
the roller assembly in the drum in position
as indicated above. |
|
Close
the arm and press
gently to lock automatically. |
| |
|
|
|
|
|
| |
|
|
| Pour
a cup of water into the drum |
|
Press
the switch downwards to
turn on the appliance. |
| |
|
|
|
|
|
| |
|
|
| Add
the grinding medium in small quantities
with adequate water
and place the hatch. |
|
When
required consistency is achieved,
switch off the appliance. |
| |
|
|
|
|
|
| |
|
|
| Remove
hatch,hold the arm,and press lock to release,
then swing
the arm upwards and rest it suitably. |
|
Remove roller assembly and wipe down the batter. |
| |
|
|
|
|
|
| |
|
|
| Remove
the drum and use required amount of batter.
The rest can be
stored in your refrigerator. |
|
|
| |
|
|
