How to Operate |
|
|
| Clean drum and Roller Stones assembly thoroughly. |
Place
the drum on coupler and
gently rotate till it is seated properly. |
|
|
| Place
the roller holder assembly inside the drum as above.
Ensure
with the line diagram printed on arm. |
Keep
the knob in unlock position and close the arm.
Rotate the knob
gently to connect spring load
and to lock the arm. |
|
|
| Pour
a cup of water
into the drum. |
Press the switch downloads to turn on the appliance. |
|
|
| Add
the grinding medium in small
quantities with adequate
water and
close the drum with hatch. |
When required consistancy is achieved switch off the appliance. |
|
|
| Remove the Hatch. Rotate the knob opposite to release spring load and to unlock the arm. Swing the arm upwards. |
Remove
roller assembly and wipe down the better. |
|
Note: Pulse / cereals to be ground, shound always be added in small quantities to ensure even grinding. |
| Remove the drum and use required amount of batter. The rest can be stored in your refrigerator. |
