Atta Kneader
 
 
Remove Roller stones and place the atta kneader in the drum. Lock the arm and feed approx 350 gm of atta through the opening provided. Pour little water and switch on the appliance. Add a little oil and salt to taste. Add water drop by drop till you get the required consistency.
 
.
  
..Coconut Scraper
 
 
Remove the drum. Now place the bowl on the shell. Ensure that the bowl and coconut scraper are clean and dry. Now fix the coconut scraper onto the coupler. Take one half of the coconut, hold it firmly on the scraper and switch on the motor. Now you will get fine pieces of coconuts. Move the coconut suitably against coconut scraper for complete scrapping. After scrapping is over, clean the coconut scraper thoroughly and remove the same along with bowl.


Note: Coconut Scraper not available in 110 volt grinders
ANGLER Technologies