Atta Kneader     Remove Roller Stones and place the atta kneader in the drum.Lock the arm and feed approx 250 gm of atta through the opening provided.Pour a little water and switch on the appliance.Add a little oil and salt to taste.Add water drop by drop till you get the required consistency.   .   ..Coconut Scraper     Remove the steel drum from the base.Now place the steel tray on the base.Ensure that the tray is clean and dry. Now fix the coconut scraper on to the driven pulley coupler. Take one half of the coconut and hold it firmly on the scraper.Then switch on the motor. After the scrapping is over,clean the scraper and ensure that no coconut bits are stuck in the corner.Remove the scraper and steel tray.

Note: Coconut Scraper not available in 110 volt grinders